How to Use Bearing Separator and Puller Set

How to Use Bearing Separator and Puller Set

User Manual: Manual for the 62593 Bearing Separator and Puller Set Bearing Separator and Puller Set

Visit our website at: http://www.harborfreight.com

Email our technical support at: productsupport@harborfreight.com

Owner's Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference.

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

Copyright© 2015 by Harbor Freight Tools®. All rights reserved.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

REV 15b

Page 2 For technical questions, please call 1-888-866-5797. Item 62593

Specifications

Bearing Splitter Sizes 2" –3"

Push – Puller Leg

Dimensions

2 sets with 2 extension

legs each; 4" –5"

Yoke 6" with Center Adapter

Important Safety Information

Assembly Precautions

1. Assemble only according to these

instructions. Improper assembly

can create hazards.

2. Wear ANSI-approved safety goggles

and heavy-duty work gloves

during assembly.

3. Keep assembly area clean and well lit.

4. Keep bystanders out of the

area during assembly.

5. Do not assemble when tired

or when under the influence of

alcohol, drugs or medication.

Use Precautions

1. This product is not a toy. Do not allow

children to play with or near this item.

2. Use as intended only.

3. Inspect before every use; do not use

if parts are loose or damaged.

4. Maintain product labels and

nameplates. These carry

important safety information.

If unreadable or missing, contact

Harbor Freight Tools for a replacement.

Specific Safety Precautions

1. Be certain that the separator jaws are

evenly set between bearing halves

before attempting to separate.

2. Lead Screw (5) should be centered

on the shaft where the bearings

are being pulled to avoid damaging

shaft or bearing housing.

3. Avoid pinching or scraping the bearing

shaft by securely (and squarely) placing

the Jaws around the bearing housing.

4. Use care when removing the Lead

Screw from the Case to avoid

damaging the threads. Pry up from

the ends of the Lead Screw.

Page 3 For technical questions, please call 1-888-866-5797. Item 62593

Operating Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the

beginning of this document including all text under subheadings therein

before set up or use of this product.

Pulling Bearings off Shaft

1. Select the proper size Bearing

Separator Jaw (2 or 14) for the

bearing size (2.2" ~ 3" or 2") being

removed from the shaft.

2. Loosen the Separator Jaw Nuts (3)

sufficiently to allow the jaws to catch

behind the bearing housing.

3. Using a wrench (not included), begin to

evenly tighten the Nuts until the jaws are

securely set behind the bearing housing.

4. Screw in both Extension Screws

of the same length (4/12 or 6/9)

into the Bearing Separator

Jaws as shown below.

NOTE: Do not use Extension

Screws of different lengths.

5. Place the 6 inch Yoke (16) over the

Extension Screws and tightly secure

with Washers (7) and Nuts (3).

6. Screw Lead Screw (5) into the Yoke

until it touches the center of the shaft

where the bearings are mounted.

7. Using a wrench, turn the Lead Screw

clockwise until the bearing housing

begins to move off the shaft.

8. Continue turning the Lead Screw until

the bearing housing is off the shaft.

9. Remove the Lead Screw by

turning it counterclockwise.

10. Remove bearing housing.

Shaft Lead Screw (5)

Yoke (16)

Nut (3)

Washer (7)

Extension Screws

(4/12 or 6/9)

Nut (3)

Bearing Separator

Jaw (2 or 14)

Page 4 For technical questions, please call 1-888-866-5797. Item 62593

Separating Bearing Housings

1. Select the proper size Bearing

Separator Jaw (2 or 14) for the

bearing size being separated.

Refer to the illustration below.

2. Loosen the Separator Jaw Nuts (3)

sufficiently to allow the Jaws to catch

between each bearing housing.

3. Using a wrench (not included) begin to

tighten Nuts until the Jaws are securely

set between the bearing housings.

4. Screw in the selected Extension

Screws (4/12 or 6/9) as shown below.

5. The Extension Screws allow

the user to grip them and add

stability while tightening Nuts.

6. Continue tightening Nuts until the

bearing housings are separated.

7. When the bearing housings

are separated, remove the

Bearing Separator Jaw.

CAUTION! Overtightening Separator

Jaw Nuts may damage bearings.

Bearing Housing

Extension Screws

(4/12 or 6/9)

Nut (3)

Bearing Separator

Jaw (2 or 14)

Page 5 For technical questions, please call 1-888-866-5797. Item 62593

Maintenance and Servicing

1. BEFORE EACH USE, inspect

the general condition of the

Bearing Puller. Check for:

• loose attachments

• misalignment or binding

of moving parts

• cracked or broken attachments

• any other condition that may

affect its safe operation.

If any abnormality is found, have the

problem corrected before further use.

2. AFTER EACH USE, wipe off Bearing

Puller with clean, moist cloth.

3. Lubricate attachments regularly

to ensure smooth operation.

4. Replace attachment if threads

begin to wear and it will not

attach to other components.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURERAND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LISTANDASSEMBLY

DIAGRAM IN THIS DOCUMENTASA REFERENCE TOOL ONLY.  NEITHER THE MANUFACTURER

OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE

BUYER THAT HE OR SHE IS QUALIFIED TO MAKEANY REPAIRS TO THE PRODUCT, OR

THAT HE OR SHE IS QUALIFIED TO REPLACEANY PARTS OF THE PRODUCT.  IN FACT, THE

MANUFACTURERAND/OR DISTRIBUTOR EXPRESSLY STATES THATALL REPAIRSAND PARTS

REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIEDAND LICENSED TECHNICIANS,

AND NOT BY THE BUYER.  THE BUYERASSUMESALL RISKAND LIABILITYARISING OUT OF

HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO,

ORARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Page 6 For technical questions, please call 1-888-866-5797. Item 62593

Parts List and Diagram

Parts List

Part Description Qty.

1Screw M12 x 1.25 2

2 Bearing Separator Jaw 2.2" ~ 3" 1

3Nut M12 x 1.25 4

4 5" Extension Screw 3/8"-16

(Male and female threads)

2

5Lead Screw 1

6 4" Extension Screw 3/8"-16

(Male and female threads)

2

7 Washer 2

8 Nut 3/8"-16 2

9 4" Extension Screw 3/8"-16

(Male threads)

2

10 Washer 2

11 Nut 3/8"-16 2

12 5" Extension Screw 3/8"-16

(Male threads)

2

13 Screw M10 x 1 2

14 Bearing Separator Jaw 2" 1

15 Nut M10 x 1 4

16 6" Yoke 1

17 Case (not shown) 1

Record Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Some parts are listed and shown for illustration purposes only,

and are not available individually as replacement parts.

Page 7 For technical questions, please call 1-888-866-5797. Item 62593

Parts Diagram

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality

and durability standards, and warrants to the original purchaser that this product is free from

defects in materials and workmanship for the period of 90 days from the date of purchase.

This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence

or accidents, repairs or alterations outside our facilities, criminal activity, improper installation,

normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,

injuries to persons or property, or for incidental, contingent, special or consequential damages

arising from the use of our product. Some states do not allow the exclusion or limitation of

incidental or consequential damages, so the above limitation of exclusion may not apply to you.

THIS WARRANTY IS EXPRESSLY IN LIEU OFALL OTHER WARRANTIES, EXPRESS OR

IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITYAND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation

charges prepaid. Proof of purchase date and an explanation of the complaint must accompany

the merchandise. If our inspection verifies the defect, we will either repair or replace

the product at our election or we may elect to refund the purchase price if we cannot readily

and quickly provide you with a replacement. We will return repaired products at our expense,

but if we determine there is no defect, or that the defect resulted from causes not within

the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also

have other rights which vary from state to state.

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797

Source: https://usermanual.wiki/Document/62593.3547104086/html

Posted by: nicolleyoun1979.blogspot.com

Share this post